Round 'D' shaped Glass Clamp with Retainer Plate
Clamps are designed to be used on the bottom corner of glass panels so the weight of the panel rests on the retention plate (no hole required)
NOTE: a neoprene block is required between the glass and retention plate).
Material: 316 marine grade Stainless Steel
Size: 63mm(W) x 45mm(H) x 26mm (Thick)
Finish: Mirror or Satin(brushed)
Base: Flat Base for mounting on flat surfaces
Glass Thickness: 8mm, 10mm and 12mm glass.
Optional: Retention Pin - Requires a hole in the glass
Price Includes GST.
Warrarnty: Please refer to website.
CODE- A1250-316
Please Note: Glass must only be installed in accordance with Australian Standards including AS 1288-1994 Glass in buildings - Selection and installation
Satin finishes are achieved by "roughening" the surface of the stainless steel. While this surface finish has a unique appearance it can trap dust and other contaminates.
Over time these can stain the stainless steel surface (teatree staining). The build up of contaminates on the stainless steel can be prevented by the application of surface sealers.
Contaminates (and stains) can be 'rejuvenated' by using stainless steel cleaners.
There are different grades of satin finish, which relate to how deeply the surface is roughened.
Jalex uses a relatively minor satin finish to reduce the extent of contaminate build up, however customers should be aware that even this surface finish will require periodic maintenance with a suitable cleaner.
Jalex recommends mirror finish for external applications but satin finishes can be used providing the customer accepts there will be a requirement to periodically maintain the surface finish .
Product Code | A1250R-316 |
Condition | New |
Weight | 0.3kg |